Description
TECNO-3 PUSH FLEX
The Tecno-3 Push Flex completely eliminates the pressure zone on the instep and considerably improves the sensation of closure. With a smaller support surface on the tongue of the shoe, with a central flexing system, it is able to accompany the different needs and conformations of the different cyclists, without creating areas of hyperpressure. It guarantees micrometric adjustment, speed of closure/release of tension and is replaceable.
REFLEX ADJUSTABLE HEEL / RETENTION DEVICE
The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe around the rider's heel. The heel retainer reinforces the top of the heel cup so the heel doesn't slip off during climbs or sprints. Each side of the heel can be adjusted independently for a perfect fit. For custom adjustment, turn the screw toward the + sign to tighten the heel retainer and toward the - sign to open it. Lightweight, easy to use and replaceable. - For added safety while pedaling, the new adjustable heel retainer features reflective inserts for better visibility in the dark.
SIDI INTEGRATED HEEL PAD
An all-new design and light, reinforced to prevent deformation after prolonged effort and pressure. Anatomically shaped, it stabilizes and supports the foot while pedaling. Reflective inserts on the heel provide greater safety for the athlete on the road, helping to signal the presence of the cyclist in poor visibility conditions.
RUBBER TOE
The upper part of the toe section is rubberized to resist and deflect impacts from rocks or debris while cycling. It is made of non-slip rubber.
MTB SRS CARBON-GROUND SOLE
MTB's SRS CARBON-GROUND SOLE raises the bar for mountain bike performance, dropping about 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability. The MTB SRS CARBON-GROUND Sole features replaceable tread blocks in the toe and heel, attached to a medium modulus carbon sole, as well as the innovative replaceable MTB plate, designed to prevent the sole from being damaged by pedal contact.
MTB SRS CARBON-SOL SOLE
Most Dual-Retention Bar MTB pedals (such as Crankbrothers and LOOK) recommend the use of a reinforcement plate between the cleat and the shoe to prevent cracks or dents in the sole. The MTB plate can be replaced in case of damage caused by the pedal system, so adding the weight of an aftermarket reinforcement plate is optional. The Ground SRS soles and the MTB plate are easily removable and replaceable. The SRS CARBON-GROUND sole of the MTB is compatible with cleats.
